A tank can be made for flat pieces welded together or hammered to shape in a stump…but then you have to get the fuel or oil out without leaks. Here are the parts to weld threads into your creation so proper fittings or petcocks can be installed. Need a special size or odd shaped bung? We make bungs and bosses of various sizes with standard screw threads, pipe threads and counter bores for socket head screws for several custom bike and tank shops. Contact us at mechwerks@mechwerks.com for a quote on your needs.

 

Cold Rolled Steel bungs with a 1” outside diameter stepped to fit a 7/8” hole. Threads are 3/8” pipe threads for gas petcocks or oil tank drains. Must be welded or brazed.

Part Number 38STLBUNG Price is $10 each plus shipping.

Cold Rolled Steel Bungs with a 7/8” outside diameter stepped to fit a Ύ” hole. Threads are Ό” pipe threads for oil lines or where ever a Ό” pipe thread is needed. Must be welded or brazed.

Part Number 14BUNG Price is $10 each plus shipping.

 

6061 Aluminum Bungs with a 1” outside diameter stepped to fit a 7/8” hole. Threads are 3/8” pipe thread. Must be welded.

Part Number 38ALUMBUNG Price is $10 each plus shipping.

Also available in 7/8” outside diameter stepped to fit a Ύ” hole (pictured). Threads are Ό” pipe thread.

Part Number 14ALUMBUNG Price is $10 each plus shipping.

Cold Rolled Steel Boss Ύ” outside diameter 1” long. Fully threaded though 3/8”-16 threads. Good for mounting tanks, lights, forward controls, making axle adjusters, peg mounts, fender mounts, sissy bar mounts, etc.. Lots of uses where ever threads are needed.

Part number 753816BOSS Price is $3.50 each or $3.00 in quantities over 10.

 

 

Back to MechWerks Home Page