|
Possibly the lowest cost
steering neck available for custom motorcycle fabrication. These steering
necks are made from 2” 1026 carbon steel DOM tubing; 5-5/8” long with a
1-1/4” through bore and counter bored for standard HD or Big Twin aftermarket
chrome steering cups and bearings. The outside is mill finish and will easily
come off with sanding prior to welding to your frame. Since these have a 3/8”
thick wall, these necks are suitable for large tube frames and can be
machined to any profile desired. (It is recommended that a minimum wall
thickness of .188” is maintained at any section of the neck.) Part number DOMNECK5625
Price is: $40.00 each plus shipping via USPS Priority Mail. Shipping weight 3# |
|
|
A stylish neck for your chop
is this tapered billet neck for use with HD or aftermarket Big Twin chrome
press-in bearing cups. Outside ends are just under 2” diameter tapering to
1.660” in the middle section. Inside is bored through 1-1/4” and ends counter
bored for proper press fit with bearing cups. The neck is cut from a billet
of 1018 Cold Rolled carbon steel and hand sanded to remove tooling marks. Part number TAPERNECK5625
Price is: $89.00 each plus shipping via USPS Priority Mail. Shipping weight 3# |
|
